不同树龄福建马尾松KP法制浆性能的评价

为了合理采伐、有效利用资源，对３种不同树龄的福建戏剧性以进行性制浆性能比较。测定了它们的纤维形态和化学组成；优选出各自的最佳蒸煮工艺；测定了浆物理强度；并对漂白性能作了研究；最后用卒 标评定法全面评价它们的制浆性能。得出２０年树龄马尾松制浆性能优良，１０年次之，３０年较差的结论。     

灰花纹鹅膏菌及其生态习性

灰花纹鹅膏菌Amanita fuliginea Hongo的分类地位和生态习性国内一直没有详细报道.用形态解剖、HPLC和种群生态学研究方法对其研究表明日本学者Hongo对该菌的分类是正确的；它的毒素含量与欧洲的主要种毒鹅膏菌Amanita phalloides(Fr.∶Fr.)Link毒素含量相当，甚至更高.湘东湘南丘陵针栎混交林非常适宜该菌生长发育与演化.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Evaluation and selection of multipurpose tree for improving soil hydro-physical behaviour under hilly eco-system of north east India

Soil hydro-physical behaviour was studied under a 20-year old agroforestry plantation consisting of five multipurpose tree species (Pinus kesiya Royle ex-Gordon, Alnus nepalensis D.Don, Parkia roxburghii G.Don, Michelia oblonga Wall. and Gmelina arboria Roxb.) maintained under normal recommended practices at Indian Council of Agricultural Research (ICAR) Complex, Umiam, Meghalaya, India. The aim was to select tree species, which could act as better bio-ameliorant as well as provides higher economic return in highly degraded soil of northeastern hill region of India. A site without vegetation (no tree) nearby the plantation was also selected as control for comparison. Soil samples for various hydro-physical analysis, were taken from 0–15 and 15–30 cm soil depth at a distance of 1 m from respective tree species during wet and dry season of 2003–2004. No appreciable differences in relative contents of textural separates of sand, silt and clay were observed among various tree covers. Surface cover with constant leaf litter fall and extensive root system increased soil organic carbon, helped in better soil aggregation, improved water transmissivity and infiltrability and in turn, reduced soil erosion in the present study. However, due to variation in quantity of leaf litter fall and root biomass, these parameters differed among tree species. Of the tree species, P. kesiya, M. oblonga and A. nepalensis were found to be rated best for bio-amelioration of soils as these tree covers had more root and shoot biomass and more litter fall compared to other species. However, considering both timber production and improvement in hydro-physical behaviour, M. oblonga was found best among the tested tree species. The study, thus, suggested that inclusion of tree species M. oblonga in agroforestry system is a viable option for natural resource management and could sustain long-term soil productivity in a highly degraded soil of this region as well as for food security of the resource poor people of North East India.     

The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

相思树种更新木麻黄防护林对林地土壤化学性质的影响

通过对相思树种更新木麻黄防护林对沿海沙地土壤化学性质的分析,结果表明:与木麻黄林分相比,在沿海沙地后沿应用相思树种造林使沙地土壤中水溶性C l-和Na+含量降低,而使表层土壤中的水溶性Ca2+含量升高;相思树种能明显地改善沙地土壤中有效养分的供给,然而,对不同的相思树种来说,其改善程度有所差异;相思树种明显地增加了沿海沙地土壤中全氮和全碳的含量,且增加的量以沙地土壤的表层最为显著。     

强化杉木复合混凝土模板的研制

以竹材和杉木为材料,试制了杉木复合混凝土模板,并对影响板材的主要因子进行了分析。结果表明,这种模板的力学性能优于木质混凝土模板而施工性能优于竹胶合板模板。     

木质素-LDPE扭矩流变性能试验研究

研究了影响木质素与低密度聚乙烯(LDPE)共混物在转矩流变仪中的共混最大扭矩、平衡扭矩以及达到平衡扭矩时间的各个因素。结果表明,木质素、淀粉降解母料、增塑剂、温度对扭矩有明显影响;在LDPE为100份时,木质素55份,淀粉母料25份,增塑剂占木质素7.5%,增容剂10.5份,温度为180℃,共混物塑化性能最优。     

小径竹重组结构材性能影响因子的研究

以南方资源丰富的小径竹为原料研究了小径竹重组结构材制造工艺,重点探讨了重组竹结构材的密度,浸胶后竹束的干燥温度,去青与不去青以及竹种(刚竹、淡竹、慈竹、雷竹)对重组竹结构材物理力学性能的影响,并分析了用自行设计的竹材压轧疏解机对小径竹疏解的原理。为高效利用小径竹提供制造工艺依据。     

中国家具业知识产权保护的现状剖析与对策

通过对家具市场中知识产权侵权现象本质的分析,指出中国家具业在关税壁垒取消后必须将知识产权保护放到 更重要的位置,并就知识产权保护中存在的问题提出了一些政策。